Monday, March 1, 2010

Used Snowmoblie Heads

Kathrein Movies DVD Service - Part 2 / 2

Burn This two-part tutorial is all about a film on the DVD that came with the DVB-S Reviever Kathrein UFS-910 recorded.

In first part is about installing the necessary programs.

The second part deals with the cutting of the film and create a DVD (without menu).

first need to demux the video files are stored ie audio and video tracks into separate tracks. You begin ProjectX where we File → Add all add. trp files to the project. These are the files "aufnahme00.trp", "aufnahme01.trp" etc. from the folder ~ receptive "to the Kathrein recording. In
'recent output directories "must be a directory are selected in which to land the demuxed files. In the example I take a new folder "modification".
Project X
can then use the button QuickStart the demux process to start. The process can be a feature film, depending on the size take up to 10 minutes.
Project X-Demux-Prozess
The program also offers more ways to transform, for example, several projects ("Collections") in succession.
work
Next We Cuttermaran with the program. There, we load the video file open button (red in the screenshot) the M2V video file of the film to be cut (the audio files are loaded automatically), eg "aufnahme00.m2v.
Filme schneiden mit Cuttermaran
Now you can rewind to the beam below the two video images through the video. You must now select the parts of the video to appear in the finished film (ie, only the cutscenes, not any parts before / after / or advertising). This one goes to the beginning of the film section. Gradually you can with the 6 buttons top right search through the video (in the screen blue). "I" is for larger Steps, "P" for medium and "B" frames ("P" and "B" are only available if previously an encoder as QuEnc were involved, see installation in the 1st part). The beginning of the section is marked with the button start, then set the cursor as just the last frame of the film section and click on end (both buttons are highlighted in green). Then you can use the button at the end the clip to the cut list (below) to add. In the section list all the sections of film to see, where they can be edited again with a right click be.
If all film sections were added, we work with the two buttons marked yellow in the screenshot. With the left, we can send us a preview show, in which only the transitions with a few seconds before / after are shown. So you can check that the transitions are good between the film sections or if you still have to change something.
Voransicht von Cuttermaran
If everything is OK, you can can be cut with the left button, the video and audio files. There must only is the place to be determined, but this can well the folder "editing" his.
Cuttermaran Ausgabe
missing then only the authoring of the DVD.
to Cuttermaran Tips:
  1. The left image when cutting is always the last image (the CutOut -image) of the last film section.
  2. Above the two image can be seen at video / audio information all downloaded audio tracks. If any are twice or undesirable, they can remember and while authoring to DVD just does not add.
  3. Below the CutOut -image, a button with a magnifying glass with him, you can find the next frame in the video that looks like the CutOut image.


For authoring we use words such as IfoEdit. In accordance with the Start We produce DVD Author → Author new DVD a new DVD. While authoring is also the multiplexing, ie, the separate audio and video tracks are combined again.
DVD erzeugen mit IfoEdit
needed here, first the video file (*. m2v) selected (not download the unedited file!). Then you have the appropriate audio files are selected (in Cuttermaran can see the names of the desired audio streams).
Finally, still needs to Output Stream - Destination the target folders are selected. This can be a new subfolder named VIDEO_TS . With one click OK to the DVD-Video files generated and stored in the subfolder. Subsequently, the IfoEdit DVD files have turned even (*. img) to a DVD image, this simply click on Tools → Create Image, select the file and the desired disc title. Now an image is created that can be fired with any burning program like Nero , ImgBurn or CDBurnerXP .
Note: If the movie is very large and should be burned to a DVD9 disc with 8.5 GB, must before building an image in the menu item Settings → Image Creation Settings the point DVD Check size before image creation be voted out. Otherwise, the program terminates with the message Error: Your files wont fit on a DVD-R! off because the movie would be too big for a normal DVD5 4.7 GB.
DVD-Image erzeugen mit IfoEdit

cut Enjoy movies! ;-)

How To Invite Friends For Wedding

Kathrein burn movies on DVD - Part 1 / 2

This two-part tutorial revolves around the burn is a film on DVD that came with the DVB-S Reviever Kathrein UFS-910 recorded.

The first part deals with the installation of the 3 needed programs, all of which are free of charge as freeware or open source available. You need Project X to convert the recorded data, Cuttermaran to cut or remove advertising and generate IfoEdit a DVD. Next you have to burn the DVD image created yet, and I shall not dwell on.

Project X Project X


used for demultiplexing ("demux") of the recorded data. Ie it separates the video and audio streams to separate files, so you can process them.
Actually, the program must itself be compiled, because the author provides only the source. In the below download link is found but a precompiled version of Project X in the form of a setup for Windows. This just has to be installed and then Project X run (it will not create a desktop icon).

Cuttermaran


For the video-editing program Cuttermaran the Microsoft. NET Framework 1.1 SP 1 requires . Cuttermaran you can download on the website and easy to install. Then you must still include an encoder, to cut the frame just captured movies. The incorporation of an encoder is in Cuttermaran Wiki explained very well in German: http://wiki.cuttermaran.de/default.aspx/AnleitungDeutsch/EncoderEinbinden.html why I will now go no further on it. I can QuEnc recommend encoder that delivers excellent results for me with the YV12 codec.
Einstallungen für den QuEnc-Encoder in Cuttermaran
After you configure the program is working.

IfoEdit IfoEdit


we use as an authoring program to cut video and audio tracks together again and produce a DVD including IFO files. IfoEdit you have to just download, extract and start. No installation is necessary.

On 2 Burn Kathrein movies "part of the tutorial



download links:

Wednesday, December 2, 2009

What Does Cawic Provide

Eclipse buttons do not work under openSUSE 11.2

problem: The buttons in the Eclipse development environment work is mostly not on openSUSE 11.2.

solution: This is due to GTK. With the version 2.18 changes were made, the Eclipse is not compatible. You have to export
GDK_NATIVE_WINDOWS off = 1 a GTK feature so that Eclipse will work again. Alternatively, the command subscribe to the . profile file of the user. After that Eclipse works perfectly now.


Eclipse bug report: https: / / bugs.eclipse.org / bugs / show_bug.cgi id = 287 307
thread in www.linux-club.de: http://www.linux-club. ? de / viewtopic.php f = 24 & t = 106 384